question

wtsnkew avatar image
wtsnkew asked

MPPT Control Display AND a VE.Direct Bluetooth interface to one Blue Solar Charger?

We have an MPPT 75/10 solar controller that is VE.Direct connected to an MPPT Control display. However using the display to configure the controller is not great. The manual devotes a lot of attention to configuring the controller using Bluetooth and VictronConnect. The problem is there is only 1 VE.Direct port on the controller and that connects it to the display. Is there a way to use a VE.Direct Bluetooth dongle and still have the controller connected to the display?


Thanks

MPPT Control display
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
shreeyash avatar image
shreeyash answered ·

Hi @wtsnkew,

With Bluetooth dongle you can configure your MPPT from your smartphone as well as smartphone will also act as a display where you can get all your stats as well. But if you still want to continue with controller display then connect bluetooth dongle and configure MPPT (one time activity) and then connect back controller display.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wtsnkew avatar image
wtsnkew answered ·

Thanks, I figured that would be the case.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic