Until I buy the rest of my system I want to use 2 separate sets each to charge 2-250 amp AGM batteries ...
Each system will have 1- 200W panel with 1 smart 75/15 BT MPPT with 1 smart battery sense unit for each battery. Can I make a network for each MPPT, smart battery sensor for each battery, just by setting up separate networks ...
Will they work as separate networks or will I have problems confusing and controlling each MPPT for each battery separately?
The reason being is the last owner cooked the batteries with a Ferro resonant charger and I am switching to some Victron equipment for the inverter charger but in the meantime wanted to be able to use the boat till I can rewire and put in new equipment as the project goes on...so how not to cook the batteries I was going to use the small solar and MPPT to keep the batteries fresh.