question

tim-barker avatar image
tim-barker asked

BMV 712 6V Setup

I have 6-Harris Plus GC2RV 6V Batteries and 2- 12V engine starter batteries that I want to monitor with my BMV 712. I have the unit wired correctly but am looking for the correct settings for the App and monitor.

Thanks,

BMV Battery Monitor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@Tim Barker

https://www.youtube.com/watch?v=mEN15Z_S4kE

For programming and understanding the settings, the video is useful.

You would need to know the total AH of your pack of Harris batteries. I see they have quite a few different models in the 6V range, so am not sure which one you are using.

And how did you wire 2x 12V other batteries to it? As far as I know it can only monitor one other battery? Unless they are in series? In any case you will really only get the voltage for the second set it is monitoring.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.