question

dennis13 avatar image
dennis13 asked

Mppt 100/30 with bluetooth dongle problem

Hallo, whenever i open the ve direct smart app to connect with my mppt 100/30 it only shows solar voltage (around 37V) and battery voltage. All other parameters such as solar energy just shows 0. If i change some settings and then go back to the original serrings everything works flawlesly. What can i do? Thanks for your answer.

Dennis

MPPT ControllersVE.Direct Bluetooth Smart Dongle
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi Dennis,

Can you make a VictronConnect Service Report and post that here? The procedure to do so is described here: https://ve3.nl/VictronConnect_How-to-create-a-VictronConnect-Service-Report ?


Kind regards,

Thiemo van Engelen

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual