question

ksb avatar image
ksb asked

MPPT 75/10 settings

I have a NuCamp Tab 320 with factory 110 watt solar. The unit came with the Victron unit described in the subject. The unit came with a Interstate group 24 81ah lead acid battery. I am upgrading to a Universal Power Group group 27 100 ah SLA/AGM battery. Do I need to make any setting adjustments in my controller. I have read through the small owners manual and see nothing that implies that I do. However I would like to make sure.

MPPT Controllers
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Paul B avatar image
Paul B answered ·

You would need to find out what the charge settings are from you battery supplier

Universal Power Group group 27 100 ah SLA/AGM battery, and then adjust the settings in the regulator if needed.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ksb avatar image
ksb answered ·

I assumed as much. I have attached the specs for the battery. In reading the specs I am have no more understanding on how to proceed Then I did before. @Paul B

45973.pdf


45973.pdf (196.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.