question

Claus Roessel avatar image
Claus Roessel asked

How can I realise a charge indication signal for the smaller MPPT-Charger models ?

Who knows a simple solution how to realise a signal with the smaller MPPT-charger models (75/10, 75/15 etc.) indicating the Charger produces energy / is loading or active.

Ideally with the help of the VE.direct pin or also the load output.

This is required to realise the idea of an energy management system with long time storage function into an existing LiFe BMS system on a boot.

The larger models use the day detection (irradiated panels) function for this.

Any ideas are welcome.


Greetings from the island,



Claus

MPPT SmartSolarsmart solar charging behaviour
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic