Hi All
Thanks to those of you who responded to me regarding my previous post. Unfortunately I had posted an incorrect diagram - that caused some confusion - I have reposted the correct diagram here. Apologies I am not even an amature electrician!
Questions:
1) I assume I can still attach all black wires from house to shunt battery only
2) Then all black from start battery to Loads and Chargers
3) then included red wires to shunt/red terminals of batteries as indicated
4) confused through about black wire that goes between black house and black start (in diagram) - feels like that would circumvent shunt if connected to both Battery Only and Loads and Chargers as per above?
5) will switching system still work?
6) I have a battery voltage meter for both batteries - might it be an option to just put Victron on House? If I did - do I leave the black cable between battery on shunt and black on start? Again - feels wrong.
7) will charging system still work - from engine alternator and 20A charger?
Thanks all - really appreciate the support!!!
