This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good Morning,
I bought the Multiplus 12/500/20.
I just wanted to know how is the correct setting for absorption voltage of 14.7V with the DIP switch.
In the manual on page 17 is written ds2 OFF, ds3 ON; In other way, on page 18 in the second example, is written ds2 ON,ds3 OFF.
Thanks to everyone know the answer
https://shop.pkys.com/Multiplus-dipswitches.html this article is good for showing how to configure using the dip switches. The answer is you have to program all the parameters in order one after the other before you get to the battery settings, so you cannot just skip to the battery voltage setting.
Do yourself a favor though and get the mk3 to usb it is a much less painful process. https://www.youtube.com/watch?v=6lH3mF2cVaY
