If I have level sensors already wired in to my 12V system with 0-10V outputs, can I connect just the signal wire and ground from my sensors to the GX Tank 140 and not take the 12V power from the unit.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
If I have level sensors already wired in to my 12V system with 0-10V outputs, can I connect just the signal wire and ground from my sensors to the GX Tank 140 and not take the 12V power from the unit.
28 People are following this question.