question

Michael Burr avatar image
Michael Burr asked

Can I use an Anderson Power end?

I have the IP67 charger. My batteries are 2 12 volt LiFePO connected in series. The connection uses Anderson power product ends. Can I put one of these ends on to the charger so I can just plug into my batteries when I need to charge them (one at a time). I don’t want to have to take my plugs off to screw done the charger every time.

Bluetooth
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Kevin Windrem avatar image
Kevin Windrem answered ·

I don't see why you couldn't fit an Anderson connector to the charger.

Not sure this makes sense in your system but you could just leave the IP67 connected all the time.


1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Michael Burr avatar image Michael Burr commented ·

Thanks for the reply. This is used on a kayak so the charger will just stay at home. My batteries are connected in series with a product that uses the anderson power connectors. I just want to be able to quickly plug in the charger without removing the cables.

0 Likes 0 ·