My boat’s house bank has 2 100AH Battle Borns wired in parallel and I’m installing the BMV712 smart shunt today. I will connect the “battery” side of the shunt to the negative post of the “back” battery. The loads are going from the “front” negative post of the other battery to a bus bar. In my previous house bank I had always connected the positive lead on the MPPT and plug in charger to the front positive post and the negatives of the MPPT and plug in charger to the negative post of the back battery for balanced charging. If I keep this configuration with the new LFP house bank will it interfere with accurate readout from the BMV712?