This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a 12/24v 100A smart battery protect and a 100ah SuperPack 100ah lifepo4 battery. I was wondering if anyone can tell me what the settings should be for the shutdown and restart voltages should be. The spec sheet says 'End of discharge voltage' which is 10v but is this the correct value and if so what would be best for the restart voltage?
Hello @Dwiea
If you are using 12v LiFePO4 battery, you should program Battery protect to program number 8(Under voltage shutdown: 12V, Under voltage restart: 13v). This program is ideal for LiFePO4 and at around 12v, battery will be at around 10% SOC.
You could also refer manual for more options: https://www.victronenergy.com/upload/documents/Manual-Smart-Battery-Protect-12V-24V-65-A-100-A--220-A-EN-NL-FR-SV-DE-PT-ES-IT-TR.pdf
Hope this helps.
Best,
Shreeyash
