question

partenope avatar image
partenope asked

Two questions on new arrived SmartSolar MPPT RS - 450/100

Dear Sirs, I have just installed today the new arrived SmartSolar MPPT RS - 450/100 . The smartphone app is delicious !

I have two questions :

- why sometimes, during the normal charging service, the display blinks ?

- I tried to set-up the relay output to "Float" status, but it doesn't works. The relay doesn't change, even if the status of Smart Solar goes to Float. Why ?

Many thanks !!! Antonio

chargerdashboard display
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi @partenope

- why sometimes, during the normal charging service, the display blinks ?
This happens when a bluetooth connection is made and this happens every time you select the MPPT RS in the VictronConnect main screen.


- I tried to set-up the relay output to "Float" status, but it doesn't works. The relay doesn't change, even if the status of Smart Solar goes to Float. Why ?
This should be fixed in the 1.04 firmware version that is shipped with VictronConnect v5.42 or later.


Kind regards,

Thiemo van Engelen


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic