I just upgraded both Smartsolar 100/50 controllers from v1.54 to 1.56 (mandatory). Controllers and BMV712 are connected via Bluetooth network.
Now the network total shows the power only of one unit on both devices. Example: device A displays 150 W as solar power and network total, device B shows 200 W as solar power and 150 W (from device A) as network total instead of 350W. It worked fine until I installed the update.
Already left the network and rejoined, restarted app, Firmware is on latest version.
Very frustrating.
Any idea what else need to done?
Thanks in advance
Marc
