question

xandafini avatar image
xandafini asked

Liontron BMS switches off when I switch on Phönix inverter

Hello to all,

I have a problem with the following combination of devices:

  • Phoenix Smart Inverter 24/3000 and
  • 2x 24V LIONTRON LiFePo 100Ah (parallel)

When I switch on the fuse of the 24 V supply from the inverter, the BMS of the Liontron batteries switches off immediately. I have found out that it is probably the capacitors of the Phoenix inverter that need too much power for the BMS of the batteries. Does anyone have a tip for me on how to solve the problem?

Is there any information on how many amps the Phoenix requires at initial start-up?

Attached is the technical data sheet of the battery.

Thank you!

Alexandros

bildschirmfoto-2021-04-18-um-223908.png

BMSPhoenix Inverter
bildschirmfoto-2021-04-18-um-223908.png (272.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
tozz avatar image
tozz answered ·

I see that this BMS has a Bluetooth connection. What does the BMS say about the reasons for the shutdown? Does it give any hints over the Bluetooth connection?

You are worried it's due to a high inrush current, but it could be something else. Such as under-voltage threshold?


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Phoenix Inverter product page

Phoenix Inverter Smart product page

Additional resources still need to be added for this topic