question

Hi

Working on proof of concept for our exhibition trailer.

Background

Normally undertake a number of outdoor exhibitions, as these are starting again looking to a hybrid energy solution as a lot of venues a actively banning use of generators so either use provided EHU or go to alternate energy.

Using the following as a use case

https://www.victronenergy.com/upload/documents/VE-direct-drawing-with-Phoenix-charger-12-50-1-inverter-375W-Li-Batt-smallBMS-MPPT-100-30-Orion-Tr-smart.pdf.

Kit includes

• 100/50 MPPT
• 200W Solar arrays
• Smart Shunt 500
• Smart Battery Protect
• Phoenix Inverter 800
• Orion TR 12/12/30 Isolated
• Venus

Question is around grounding.

Phoenix in the above use case is bonded to the -ve busbar I am assuming the bus bar is also grounded to the chassis to EHU power

I'm assuming the 375/800 has the earth connected to the N of the AC output by the internal jumper.

Rgds