Dear Community,
I would like to request your help regarding setup of a Skylla IP65 12/70 1+1 connected on VE.CAN to a intelligent BMS.
A REC-ABMS is issuing CVL, CCL and DCL data (respectively Charge Voltage Limit, Charge Current Limit and Discharge Current Limit). Data appears correctly on a GX display.
The Skylla is also connected to the GX display and data appears ax expected on the same GX display.
I would like to configure the Skylla so it follows CVL and CCL values. I have enabled the BMS Present feature (#31) but this lead to the following error after apporximately 10s : "error 67 : BMS connection lost".
I would be very grateful if someone could help suggesting the setup necessary to get the Skylla to honour the CVL and CCL data.
Best regards,