I have a Quattro that loads 2 lipo batteries on a greenline 40. It goes from bulk to only inverter on when on shore power.After bulk stops only the inverter on led burns. In the manual that is not a described state for the system. Is this a problem?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a Quattro that loads 2 lipo batteries on a greenline 40. It goes from bulk to only inverter on when on shore power.After bulk stops only the inverter on led burns. In the manual that is not a described state for the system. Is this a problem?
40 People are following this question.