question

John M Brandes avatar image
John M Brandes asked

Do I need to change the dip switches after setting the BMS Assistant?

Just a simple question.
Just installed two multiplus' in parallel single phase. I did successfully install the BMS assistant on the master by switching the dip switches to 1 on and 2 off. All is working. My question is, should the switches be left in that position?

MultiPlus Quattro Inverter ChargerBMS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

As long as the VE.bus BMS is connected the DIP switches have to be in that position.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.