Is there a smart Voltage AND Current profile for any Victron device to manage lithium batteries that looks for the Knee in the charging to determine full?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is there a smart Voltage AND Current profile for any Victron device to manage lithium batteries that looks for the Knee in the charging to determine full?
If you by "knee" you refer to the transition between bulk and absorption, then all Victron chargers do this. The charge current is held at the set value until the absorption voltage is reached, then the voltage is held allowing the current to reduce. At near zero current, the chargers enter float mode where the battery is held at a lower voltage.
55 People are following this question.