I have a 24V3000VA 120V Multi Plus. I will be connecting it to two 12V206ah SOK batteries for a 24v system. I am looking at configuring my multiplus but have a specific question regarding using an assistant. Victron states that during configuration when using non Victron lithium batteries one should use the assistant “Two signal BMS Support” This will enable the SOK BMS to have control over charging and discharging parameter. I noticed from a Battle Born video and from posts on an SOK forum that some users are not selecting the above assistant. Instead they are simply selecting the charger tab to lithium and adjusting settings there as per the battery manufacturer specs. The latter would have the Multi settings as the master over the battery BMS. Is there any issue with latter method?