question

fundutzi avatar image
fundutzi asked

Venus to MultiPlus, where to set load off if battery voltage X

Dear All,

Objective: View and or change the "cut load off" if battery voltage = X volts using Venus GX connected to Multiplus.

With PC, VictronConnect software and data cable this can be set.

Devices are remote, not possible to go with PC.

Where in menu for Venus GX connected to say MultiPlus can I view and or change this setting to cut the load if battery voltage = X volts?

Thank you.

MultiPlus Quattro Inverter ChargerVictronConnectVenus GX - VGXbattery
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
seb71 avatar image
seb71 answered ·

You can change the inverter settings via VRM (and using VE.Configure 3 software).

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

fundutzi avatar image
fundutzi answered ·

Seb71, I am much obliged, this solved it thank you.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.