question

dfraizer avatar image
dfraizer asked

MRBF Terminal Fuse Block with M10 hole on a M8 bolt on 200A 12.8 v smart 200A battery

I am at the point where I will be installing my new batteries. I will be fusing them at the battery with MRBF terminal fuse blocks.The battery bolt is an M8 and the terminal fuse block hole at the battery post is M10. Is this a problem and should I just use a washer on top?


battery
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
JohnC avatar image
JohnC answered ·

Hi @DFraizer

The M10 hole is probably to help seat the tab to Pb posts. You could just use a washer, or for the ultimate, a flanged and serrated nut. I like stainless steel around batteries, but shouldn't matter for you.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic