Hi, ist this normal, thats the id 100 ist multible times adressed?
Or must i change the Adress of the mppt an Shunt?
LG Denis
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, ist this normal, thats the id 100 ist multible times adressed?
Or must i change the Adress of the mppt an Shunt?
LG Denis
Hi there, I have just started looking at Modbus comms for Cerbo connected devices for a HMI project for one of my clients.
I would suggest that you should be OK with more than 1 device with ID:100 because the registers for each do not overlap.
As per latest Modbus/TCP register list v2.70
Hope that helps and that my understanding of how the Cerbo works is correct!
25 People are following this question.