question

michelbuyckx avatar image
michelbuyckx asked

Battery protect : only 1.7V on output

I installed a BP 100 with 2 LiFePo4 batteries in 24V. I programmed the BP 6A. When I put back the remote connector, the screen flips between number 3 and 4. I mesured 26V on the IN and 1.7V on the OUT. Same situation with load connected or not.

Battery Protect
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers