question

missy avatar image
missy asked

How to fit a remote switch to inverter - for dummies

Hi!

I'd like to add a remote switch to my MultiPlus 12/500. I was intending to get a 3 position rocker switch but am now pondering the digital multi control because it might be nice to have the extra info on what the multi is up to.

I don't know if my system is ve bus or non, but only have 1 AC source.


Is one switch better than the other? Apart from the extra monitoring?

Is one going to be easier to fit than the other?

Will I just be running 1 utp cable for the digital control?


Thanks in advance!

Missy

MultiPlus Quattro Inverter ChargerDigital Multi Controlswitch
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

"I don't know if my system is ve bus or non (...)"

Unless your Multi is more than 10 years old it has VE.bus. :)

For the DMC you just need to plug in a RJ45 cable.

A simple switch costs just a few bugs.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.