Hi,
I have 4 LiFePo4 90Ah batteries that are about 6 years old. They are not the smart model, but do have BTV leads to connect to a VEBus BMS.
The system will be setup in a location where on occasion the batteries could experience temperatures of 0deg C.
I will be purchasing a smartshunt in order to measure consumption/soc etc.
If I purchase the temp sensor for the smartshunt, will this cut the charging current from both multiplus and victron mppt if the temperature drops below 0deg C?
I also have a Color Control GX that will be installed with the system and connected to the smartshunt and mppt via V.E direct. The CCGX will also be connected to the multiplus via V.E Bus.
Thanks