question

David Gould avatar image
David Gould asked

GX reading Grid wrong

OK so not sure how it calculate it but i have the following on my dash. approc 12kw generated , 6.8kw to battery and 11kw to grid which is kinda wrong.


Any ideas why / what. Looking at MQTT the levels look closer to correct, or at least add up better untitled-3.png

Venus GX - VGX
untitled-3.png (161.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@David Gould

It is possible it is a data refresh, sampling or transmit rate of each of the components.

So the synchronisation between each of the widgets is a bit out I would think. Hence also the difference in mqqt and the screen.

I have seen on a few different brands that the delay can be anything up to 10 seconds between load increase or decrease and the figures appearing on the monitoring system.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

David Gould avatar image
David Gould answered ·

Thanks for the reply, understand this but it was like it it changing slightly for quite a while

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.