This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
I really like the dash board. I added a new shunt to the system to monitor my wind generator output. This has not turned up on the dash board, which has surprised me.
Does anyone know if there is any way top control which devices do appear on the dash board? If not could a feature be requested to allow the user to select which battery devices/shunts do get displayed.
Hey @Bathnm, try Settings -> System setup -> MFD battery.
its near the bottom in that menu. Does that work?
as then we need to clean it up:
- make it clear in manuals how to configure this
- rename that setting in that menu
Ps its in the manual, so not that bad afterall. :-).
see here:
https://www.victronenergy.com/live/vrm_portal:dashboard#details_per_section
@mvader (Victron Energy), Many thanks. Yes that did it. Now you have provided the direction, I remember asking the question before. Be good if possible to also add to the VRM display the Current for all the displayed monitors as well as the voltage.
