question

alex-2 avatar image
alex-2 asked

Help... 3 PV arrays, 3 MPPT and 2 battery banks

Hi - I have 3 separate solar arrays, each feeding into its own 75/15 MPPT which then feeds 2 separate battery banks (which can be individually selected or linked with a selector switch)


I guess my question is should/could all this be run on a single VE network? (I have 2 shunts, 2 BMS, 2 smart protect, 2 battery sense and 2 LiFePo 100Ah batteries)

My other question is if I link the batteries in parallel, which battery should I put the smart battery sense on? or shich should I connect to the BMS or use both?

Many thanks for all your help

power-layout.png

battery chargingMPPT SmartSolarBMSSmart Battery SenseVE.Smart Network
power-layout.png (496.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wice22888 avatar image
wice22888 answered ·

May I ask why you need smart protect on lithium battery, which can safely be discharged to zero and charged again, which officially would be considered as a one cycle?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron VE.Bus BMS product page

Victron 3rd party BMS compatibility page

MPPT product page

VictronConnect manual

PWM or MPPT

MPPT calculator

MPPT codes

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Smart Battery Sense Product Page

Smart Battery Sense Manual



Additional resources still need to be added for this topic

VE.Smart Networking Manual