This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I can download my Multiplus config through VRM and edit it in VEConfigure. But when I try to close VEC to upload the new settings it insists that a Grid Code is needed, although the Grid setting is 'No...'. So I can't alter the Multi. Any suggestions?
This only started recently and the only change might be a firmware upgrade.
MultiPlus 24/3000/70-16, firmware 401
VEConfigure 90.04.223
Pete
Does it work if you don't make any changes?
Have you made any changes to the grid code (even changing it from something else to None is a grid code change)?
Did you add ESS?
Have you saved the downloaded configuration (before editing it) or you opened it directly?
Thanks seb71.
I can't tell if it uploads with no changes. VEC just closes.
I'd never touched the Grid code before it happened.
I tried to add ESS once but it was incompatible with the firmware - there are no assistants now.
Saving first makes no difference.
