question

peternielsen avatar image
peternielsen asked

Setting VebusSetChargeState to Force absorb stops if the BMS set the charge to float and then resets flag

Hi,

If i set the VebusSetChargeState to 2 e.g Forced Absorbtion then the 2 wire BMS signals to go to Float and when the BMS clears the #3 the charger doesn't go back to Absorption but stays in Float, is that intentionally ? @mvader (Victron Energy) do you know?

/peter


modifications
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic