Hello,
For a solar system using two Multis on split phase, I need to confirm if a can use the filax 2 transfer switch. When batteries are charged, the Multis will supply power to the essential loads but when batteries are discharged then the Filax will switch to the grid, and switch back once it senses voltage from the Multis.
This configuration is having in mind the Multis as priority source as the loads are intended to be powered by the solar system, and the grid as the alternate source.
I need to know also which model to use for this application CE 230V/50Hz-240V/60Hz or CE 110V/50Hz-120V/60Hz.
Regards.