This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
to Victron staff:
I think it would be good if the BMV manual would include drawings (diagrams?) of the installation position, like there is in the 'quick installation sheet'
This would make referring to 'the' manual easier (now have to refer to two manuals)
https://www.victronenergy.com/upload/documents/Quickinstallsheet_BMV70x_part1_2.pdf
It's a very good suggestion, I have noted it and will pass it along.
As it is an improvement (instead of a correction), We may have to wait until there is an additional improvement made to the system. We are working to make manual updates, discovery and reference an order of magnitude easier across the range.
