I have a comprehensive Garmin network comprising of qty 3 Garmin 8617 MFD's, qty 1 Garmin 8616 MFD and qty 4 GMS10's that were installed by a Marine Electronics Company.
I have a Lumishore Lighting System that takes full advantage of OneHelm and works very nicely.
I configured the Cerbo GX plugged into one of the GMS 10's, for Garmin OneHelm support for Victron to displayed on all Gamin MFD's
The Victron HTML7 Web page displays on all Garmin MFD's if I power down the Garmin Marine Network, wait 5 minutes and power on the Garmin Marine Network. If I put the Garmin Network into sleep mode and select Power button to come out of sleep mode, Victron Energy displays on all MFD's and I do not have to recycle the Garmin Network.
Any thoughts on why this might be happening? I'm plugged into the correct Cerbo GX network port and the Cerbo GX is receiving DHCP released IP address from Garmin Network.