Dear community, good afternoon
I have an EasySolar 12V/1600.
Is it possible to connect VE.Bus BMS + LiPoFe4 Smart batteries to it without using a GX interface?
Thanks for your comments,
Best regards,
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Dear community, good afternoon
I have an EasySolar 12V/1600.
Is it possible to connect VE.Bus BMS + LiPoFe4 Smart batteries to it without using a GX interface?
Thanks for your comments,
Best regards,
The ve bus connects directly to the multi and so communicate directly with it, so I don't see why you cannot just do that.
It has led indicators to let you know what is going on as well.
It's job is to disconnect loads or charging depending on the necessity, so as I understand would be independent of any other system Just be sure to load the assistant for it.
They can even be used in no ve bus products like the phoenix which has no monitoring really to speak of. You can find system examples in the manual liked above.
EasySolar-II GX 3000 & 5000 product page
Victron VE.Bus BMS product page
Victron 3rd party BMS compatibility page
Additional resources still need to be added for this topic
Did You Know - How to create a battery profile for non-Victron batteries?
31 People are following this question.