Connect two cerbo go together

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

yellowtown asked Feb 9, '21

Hi

I got one cerbo go connected to a smart shunt and two mppts.

that’s all good but I also have tree more connected to another one, is there a way to get them to talk to each other? So I only get one panel in VRM?

cerbo gx VRM

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-02-09T22:14:17Z

seb71 answered · Feb 09, 2021 at 10:14 PM

Assuming it's a single system, connect all to a single Cerbo GX.

If all are using VE.Direct, you can use VE.Direct to USB cables and an USB powered hub (connected to Cerbo GX).

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

yellowtown commented · Feb 10, 2021 at 06:42 AM

Hi!

Yes, But the distance between the MPPTs are quite long and hard to route.

0 ·