I have two solar arrays, one facing the north and one array facing the west. Each have its own Blue Solar 150/85 MPPT. The two are daisy chained to the Venus via the VE Can bus. On the Venus I see only one MPPT but can see out of the stats that the Venus is controlling both and accumilate the power generated.
How can I configure my system to display the MPPT's seperately but keep the ext control active. I have tried to change the instance on one of the units but then one keeps displaying HUB-1 while the other unit then show standard info. I have also tried to connect each one directly to the Venus but then one unit shows HUB-1 and the other loses external control.
Thank you