Hello everyone!
I am using a Multiplus 12/1600/70 with two 255AH batteries. Also, a 600W solar panel is connected to a MPPT 100/50. Also, I have a generator as a backup (3Kv Honda). A bmv is controlling the generator. It will turn on when soc drops to 50%.
The load is an instrument with 20A DC consumption. It is using 20A continuously.
The instrument is collecting data every second. I have some issue with lagging specially when the generator turn on. In this moment I have data every 10-20 seconds instead of every second.
The power assist is off on Multiplus configuration.
How can I fix this delay in the instrument. Should I turn the power assist on?
When the Multiplus is just invert from batteries and solar panels are able to charge the batteries, I don't have any problem.
I would appreciate if you could give me some advice.
Thanks in advance,
Milad