question

Allen Roberts avatar image
Allen Roberts asked

Difficulty updating from 1.72

Hi

Trying to update my color controller to version 2.12. I downloaded the update and put it on a micro sd card. Rebooted and got the message boot from decade followed by preparing update from mmc. Doesn't progress from that point. Suggestions?


Allen

firmware update
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Have you followed the specific upgrade instructions, and special update image from this page?

https://www.victronenergy.com/live/ccgx:firmware_upgrade_to_v2

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Allen Roberts avatar image
Allen Roberts answered ·

Yes I did.

What I discovered was the update happened, just no feedback occurred. So I would suggest updating the instructions so people know that it is possible for the update to happen when no messages occur on the screen.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic