hi guys ive recently purchased a smart solar MPPT VE.Can 150/100
when i first wired it up it had 110V on the array and system voltage was set for 48v the batteries were sitting at 50.5v but no current flowing even tho the bulk charge light was on
i took it back to local agent who tested it on a 24v system as they didn't have an array big enough or enough batteries to setup for 48v system
it worked perfectly
when i got it home i just changed system voltage back to 48v and there is no current flowing
so i retested it here with 110v on the PV array and system voltage at 12v and on one battery and it worked
i then retested it at 24v system voltage with 2 batteries & on same array and it worked
but doesn't work on 48V system
has any one else had this issue
running firmware V3.02
