Can anybody tell me if the installation on the attached diagram is correct to read the midpoint charge on a battery bank. I have the same setup with 12 x 12v bateries.
Thanks
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Can anybody tell me if the installation on the attached diagram is correct to read the midpoint charge on a battery bank. I have the same setup with 12 x 12v bateries.
Thanks
This is an diagram out of the official Datasheet of the battery balancer so why should this not work?
There is also a wiring diagram in the manual of the BMV:
https://www.victronenergy.com/upload/documents/BMV-702-quick-installation-guide.pdf
I am not sure if the bank I got, connected in series and parallel, and to check midpoint if it is the correct way to connect B1 and B2.
I am not sure if it would is correct for my battery bank, that is connected in series and parallel
Additional resources still need to be added for this topic
22 People are following this question.