Good Morning All,
I hope someone can help with this question.
I have a Multiplus II 48/3000/35-12 with a 1.85kw AC coupled PV system connected via the AC-in.
Import/Export is measured via an ET112 in my main consumer unit.
I am trying to monitor the output of my PV inverter using an AC current sensor(CSE000100000) which is connected to and configured on the TEMP-sense input.
Everything is working fine except the output of the PV inverter always reads as 0 unless I disconnect the wire to the sensor in which case the Multiplus reports the Inverter is consuming 2000 watts.
Any tips to try and fix this would be greatly appreciated.