This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
After connecting the Shore Power, the SOC went from 98% down to 0% during charging.
During charging 14.4V , -60A it always just was showing discharging.
Setup:
- 1 x Victron Quattro 12/3000/120-50/30 230V
- 2 x Victron BlueSolar MPPT 100/30
- 1 x Victron Color Control GX
- 1 x Victron BMV 702
Thank you for your feedback.
Best regards
Hubert
The most common cause of this problem is that the shunt is the wrong way around.
On the shunt PCB is written "Battery Only" on one end and "Load and Charger"
These must be wired correctly to ensure that the current flows through the shunt in the correct direction.
Yep.
Make sure the negatives for inverter and mppt are connected to the load side of the shunt and only the battery connected to the battery side.
strange .... from one moment to the ...
whitout changes it again 100%
