Good evening, I have been a very satisfied Smartshunt owner for about 2 weeks.
But I have some doubts.
1) I would prefer victronenergy to change the cycle count setting.
In fact, the software only counts a cycle when the battery drops below 65%. This is misleading.
I use a total of 190ah on the camper and the average discharge is 10/15%.
It may turn out that an Agm battery reaches the end of its life and the Smartshunt records only a few dozen cycles.
When in reality the battery has done the 1000/1200 cycles of 15/20% discharge.Cycles that are not counted by the Smartshunt.
Fortunately, the synchronization count is more realistic. Since a synchronization is counted every time the Soc goes below 90% and goes back to 100%.
So I associate the synchronizations with the number of cycles.
It is not possible that in two weeks of daily use it has only 2 cycles.
In reality I am 15 cycles of 20% of discharge... in fact I have about 15 synchronizations.
Otherwise my batteries will die with only 10/20 cycles recorded.