Hello
i have install today the new Dc-Dc isolated 30 amp
here's my setup
Truck battery - guage2 wire 25' - breaker 80amp - , gauge 8 wire 2 ' - battelborn 2x100
i purchase this unit to increase the voltage and have 30 amp to recharge the Battleborn
Lipo battery need more than 13.6 to charge
so far i was not able to get good voltage on the camper batteries
- the Bluetooth signal is not good. Compare to my other unit (all at the same place)
- what setting should be done to get higher voltage?
example
truck alternator is at 14.5
output is a 13.3
link to Lipo battery
How to Find Happiness With LiFePO4 (Lithium-Ion) Batteries - Solacity Inc.