question

missy avatar image
missy asked

what size cable to connect shunt to batteries? VBMV 712

I can't find the answer in the user manual or quick installation guide.

Should it be 50mm2, the same as the cable connecting my batteries together?

I presume the cable for battery to shunt should be the same size as shunt to negative bus.

Thanks!


BMV Battery Monitorwiringmonitoring
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

The cable size needs to be appropriate for your load.
If 50mm2 cable is the correct size for your system then go with that throughout.
Those big brass bolts on the shunt may look a bit daunting, but they are that size in order to accommodate larger systems.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Victron BMV battery monitors product page