question

john-mc avatar image
john-mc asked

Adhesive to mount Smart Battery Sense?

I have replaced the battery the Smartsense is mounted on. What adhesive is appropriate to use to mount it on the new battery without impacting its function?

Smart Battery Sense
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

It should be as thin as possible to provide a good temperature transfer to the sensor.
There is also adhesive thermal compound available.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

john-mc avatar image john-mc commented ·

Thanks, I figured that was the case, so I’m looking for recommendations of specific adhesives that would be suitable and are readily available

0 Likes 0 ·
Mark avatar image
Mark answered ·

I have used Nitto No. 512 for similar applications, it's 0.15mm thick and has good adhesion strength; although you might just be best to see what's available at your local hardware supplier first.

https://www.nitto.com/au/en/others/products/group/file/datasheet/NJ_No.512_EN.pdf

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Smart Battery Sense Product Page

Smart Battery Sense Manual