question

jokani avatar image
jokani asked

MultiPlus - PowerControl & PowerAssist

I am hoping to be able to set my MultiPlus to limit incoming shorepower to 15A, and any power required above that to be supplied by the batteries/inverter.

I think I need a AC current sensor 'Victron CTR110000500' but on one retail site there was a note saying this is only for the MultiPlus II.

If someone could clarify, I would be grateful.

MultiPlus Quattro Inverter Charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
seb71 avatar image
seb71 answered ·

There is a setting in Multiplus to limit the AC input current.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.