This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Just purchased 75/15 blue solar mppt and using with battery box which holds 100ah lithium battery (solar king 100ah) just wondering what the best settings are for mppt setup (Bluetooth Dongle) - I have selected Lifepo4 thus far but that’s it, any other useful tips I’m using 200watt solar blanket - using for camping to run 75l fridge lights etc . Cheers Glen
Max charge voltage seems to be very high. I wouldn't go that high.
Just saw a review here: https://www.youtube.com/watch?v=saVqYQVfXQ0
They showed installation instruction where it says recommended bulk voltage (which is absorption voltage) 14.8V. Even that seems to be on the high side. But depending on chemistry and cell type could be real. I suggest contacting the dealer or get in contact with Solar King and ask for advice on bulk/absorption and float voltage to be on the safe side.
Hi @Glen Rowe,
no tips. It should work out of the box when LiFePO4 is selected. But you should check that the settings 14.2V Absorption and 13.5V Float are in line with the specs of your battery manufacturer.
